| IMPORTANT!
Flexibility is important. |
 |
The
image must be flexible enough to retract easily
into the cannister. Laminating both sides
with a polyester material is not recommended.
Using 10mil polyester or polycarbonate laminate
can make the image too rigid to retract. |
| |
Construction:
Extruded Aluminum
|
Display
Unit Case Dimensions: 4"
x 34"
|
Recommended
Ink Jet Media: Reverse
print on 12 mil Raxam polycarbonate w/ 3 mil
white sign vinyl backer. (example product:
Rexam or Lexjet polycarbonate)
|
| Shipping
Weight: 12 lbs. |
| |
 |
 |
Magicpak
banner systems will accomodate a variety of
rollable media. Contact us if you are not
sure which materials will function properly.
|
 |
Do
not laminate both sides with a 5mil Polyester
or Polycarbonate material
because the graphic will be too rigid to retract
properly. Laminating with Polycarbonates thicker
than 5mil can also cause malfunction in the
roller mechanism.
|
 |
Trimming
Tip: Use 1/8" or 1/4" clear
plexiglass as a cutting guide template to
insure a square cut. Cut plexiglass to 33.5"
x 88".
The graphic must be cut square or binding
will result and prevent proper retraction. |
| |
| |

|